Does not dry or drip even at high temperatures. Performs excellently works without any wear.
Tekstilinės grandinių alyvos
Tekstilės grandinių alyvos
Rūšis |
Klampumas prie 40ºC, mm2 /s |
Tankis, prie 15ºC, kg/m3 |
Darbinės temperatūros, ºC |
Spalva |
Panaudojimas, savybės |
Molylub ChainTex KF 260-E |
260 |
960 |
+10 iki +240 |
gelsva |
Aukštatemperatūrinė sintetinių esterių pagrindo tekstilės įrangos grandinių alyva.Išskirtinis stabilumas senėjimui ir oksidacijai. Sudėtyje yra dėvėjimąsi stabdantys priedai. Ypač sunkiai termiškai apkrautoms tekstilės pramonės džiovykloms. |
Molylub ChainTex KF 270 |
270 |
930 |
-20 iki +220 |
rusva |
Aukštakokybė sintetinė esterių pagrindo tekstilės grandinių alyva. Puiki atspara temperatūrinei oksidacijai, korozijai nuo drėgmės ir karšto garo. Ypač termiškai apkrautoms klipsatorinėms džiovinimo ir rinkimo (karštos srovės ir ištempimo rėmai) mašinų grandinėms .
|
Molylub ChainTex KF 100
|
100
|
930
|
-27 iki +220 |
skaidri |
Žemesnio klampumo pilnai sintetinė esterių pagrindo aukštatemperatūrinė tekstilinė greitaeigių grandinių alyva. Išskirtinės antikorozinės savybės, apsauga nuo dilimo. Labai lipni ir plataus paviršinio padengimo. Naudotina kojinių gamybos internatinių mašinų automatinėms grandininėms pavaroms. Taip pat rekomenduojama garintuvų ir formatavimo mašinoms, ištempimo rėmų konvejerių grandinėms. Alyva tinkama centrinei tepimo sistemai ar alyviniams purkštukams.
|
Alyvos tekstilės pramonės įrangai
Synthetic high temperature chain oil
used for long term lubrication (low friction characteristics) of chains, sideways, stentors, open bearings subjected to very high loads and saturated steams.
Synthetic high temperature chain and lubricating fluid
Molylub ChainTex is a fully synthetic oil specially developed for chains and other mechanisms and is formulated to give high performance lubrication at elevated temperatures with a minimum tendency to form carbon residues. This state-of-the-art chain lubricant will provide outstanding performance on all type of industrial transport chains including roller, leaf, galle, bushing and inverted tooth chains as well as sliding and plain guides. The operating temperature range is between 250 and 300 ºC. If the product is used below 250 ºC deposits will be created and therefore it is recommended to select another chain lubricant from the Molylub ChainTex S or Molylub ChainTex T range. Relubrication depends on the actual application temperature and is important to maintain a proper lubricating film. Molylub ChainTex is specially recommended for lubrication of chains in applications working between 250 and 300 ºC but not higher. If used properly, Molylub ChainTex will not leave any residues on the chain, giving a clean, carbon-residue free and trouble free operation. Conventional chain lubricants tend to create carbon residues with inherent smell and will eventually block the chain, resulting in increased energy consumption. Molylub ChainTex is a clear-transparent oil and is a non-toxic, non-hazardous product and complete safe to operate.
Applications
-
Transport and drive chains
-
Control and lifting chains
-
Chains in painting equipment
-
Drying tunnels
-
Ovens
-
Textile stenter frames
-
All type of chains working between 250 and 300 ºC