Brandt staklių tepalas

BRANDT baldų staklių tepalai

Tepimo taškas 

Specifikacija, inventorizacinis pavadinimas

Rekomenduojama tepimo medžiaga

Mineralinė pavaros alyva

SAE 85W-90 / MB 90

Molylub Gear SP 150

Kreipiančiųjų alyva

Brandt 2-070-80-0090

Molylub Gliss 68   ( 20 ltr )

Molyduval Hertz M 68 H   ( 5 ltr )

Suspausto oro alyva

HL 25

Brandt 4-017-01-1036

Molyduval Phoenix M 22  ( 5 ltr )

Molylub Hydrostar HT 22  ( 20 ltr )

Tepalas riedėjimo + slydimo guoliai

KL 2K

Brandt 2-006-80-1290

Molylub Lycoz MZ 2  ( 18 kg )

Molyduval Long-Life HD 2  ( 400 gr )

 

Klijų velenėlis                            

 

Brandt 2-006-20-0020

Brandt 4-017-02-0010                                   

 

 

Molyduval Casone CSM 2  ( 400 gr )

Brand klijų bakelis                    

Turmsilongrease mittel TF Homag          

Molyduval Siligra HT 2

Pasta kaitinimo elementų montavimui

Longterm 2 Plus / Gleitmo 500

Brandt 4-165-70-0003

Molyduval Quick BA 1 CC

Molyduval Ciric B 271  ( 100 gr )

 

Tepalas THK kreipiančiosioms, įrankių variklių guoliai

Microlube GL 261

Brandt 2-001-95-0150

 

Molyduval Long-Life HD 1

 

Brandt tepalas

Brandt Optimat KTD Series – Edgebanders

Automatic table edgebanding machines - the flexible solution for shaped components.

The Brandt KTD 720 represents a flexible machine concept. The goal of the development was to have a machine not only for efficiently and reliably gluing a series of formed parts but also for processing smaller quantities of straight parts.

The field of irregular shaped work-pieces has become more and more extensive but a batch size of "1" can be today's standard. The Brandt KTD 820 has been created for this requirement.

KTD 720 Optimat KTD 720 Optimat

The Brandt KTD 720 edgebander represents a flexible machine concept. The goal of the new development was to have a machine not only for efficiently and reliably gluing a series of formed parts but also for processing smaller quantities of straight parts.

The KTD 720 has a gluing system, which applies the glue directly on to the edgebanding material. The coil-cut off device is either activated by foot pedal or, for serial production, by pre-selecting the edge length via a digital length counter (optional). The panel is placed on height spacers, which are fixed on the working table, according to the shape of the panel. No template is required. Because of the flexibility of the Brandt KTD 720, shaped parts and straight parts can be processed easily on this machine.

Brandt KDN 210 -OPTIMAT Brandt -Homag KDN 210

Compact Edge Banding Optimat KDN 210 well maintained excellent condition machine can be seen and demonstrated! Glue using glue roller Electronic Leimtopf- temperature control Automatic Leimtemperatur- reduction including at work interruption Automatic edge magazine for rolled materials and fixed lengths. Role separator roller plate 800mm diameter pressure zone with pneumatically driven main urge and two pressure rollers Central adjustable top pressure central chain lubrication control panel at machine infeed End cutting for front and rear edges supernatant using high-precision linear guide 2 motors per 0,18 Kw 12,000 U / min swivel range for straight on chamfer cuts 0-15 degrees Flush trimming with vertical and horizontal keying 2 engines above and below, 0.27 kw 12,000 U / min Equipped with 2 WPL combi cutters, straight / radius - chamfer radius 2mm scraping unit with chip collection box KDX 200 scan up, down and sideways to the chamfers and rounds of pre-milled PVC edges workpiece thickness: 8-50mm Edge thickness: 0.4 to 3.0 mm Feed: 9 m / min Electrical: 400V - 3 phase - 50 Hz Compressed air supply: 6 bar Weight: 800 kg Length of machine: 3450mm Incl. User manual