Atviroms termo sistemoms

Šilumos pernešimo alyva atvirai sistemai                                             

Rūšis

Klampumas prie 40ºC, mm2 /s

Tankis, prie 15ºC, kg/m3

Pliūpsnio temperatūra PMCC, ºC

Stingimo temperatūra ºC,

Panaudojimas, savybės

 

 

Repsol

Helen 140

 

 

 

 

460

 

 

 

 

906

 

 

 

 

265

 

 

 

 

-9

 

 

Specifinės termo alyvos necirkuliacinėms sistemoms.

Atviroms ar turinčioms kontaktą su oru, besiurblėms termo sistemoms skirta pusiau sintetinės formuluotės cilindrinė alyva.

ISO 6743/12 – Q; ISO 6743/6 – CKB.

 

Specialios termo alyvos parinkimas netipinėms termo sistemoms

Atviro ciklo šilumokaičių tepimas atsparia oksidacijai alyva

Oxidation Resistant Heat Transfer Fluid for Open-Loop System

Oxidation Resistant Heat Transfer Fluid

Molylub offers the next generation of heat transfer fluid for open-loop heat transfer fluid systems.

Purpose

Molylub Therm OS is a hydrocracked base oil combined with the latest proprietary oxidation inhibitor/stabilizer. Molylub Therm OS was designed to meet the rising and demanding requirements of liquid phase open-loop heat transfer fluid system applications.

  • Oxidation

The most common form of contamination is oxidation of the heat transfer fluid. Excessive oxidation can create solids and high viscosity compounds that impair system effectiveness. Oxidation and fluid boil-off are major problems when using organic heat transfer fluids in an open-loop systems. Oxidation produces organic acids, which can polymerize and create deposits.

  • Open Systems

Molylub Therm OS is designed for use in liquid-phase heat transfer fluid systems, which are “open” to the atmosphere or there is a possibility that the heat transfer fluid in the expansion tank will come in contact with air. To reduce the oxidation process in an open-loop system, Molylub Therm OS is enhanced with special oxidation inhibitors to prevent this oxidative degradation and deposits.

Molylub Therm OS heat transfer fluid is designed for a maximum film temperature of 600°F / 316°C and a maximum system bulk temperature of 550°F / 290°C.

  • Low Vapor Pressure

Molylub Therm OS heat transfer fluid has a very low vapor pressure. This is important because fluid boil-off is an issue in open-loop systems. The rate of boil-off of a heat transfer fluid is dependent on the fluid vapor pressure. The higher the vapor pressure, the greater the rate of fluid boil-off.

  • High Flash Point

Molylub Therm OS offers the benefit of having a high flash point of 455°F / 235°C. It also offers the extra benefit of having a higher Fire Point then most other heat transfer fluids. Molylub Therm OS has a Fire Point of 520°F / 271°C.

Benefits of Molylub Therm OS:

  • System heat transfer characteristics last longer due to improved oxidation resistance

  • Excellent Thermal Conductivity at high temperatures

  • Thermal Stability from improved oxidation resistance reduces efficiency robbing components such as coke deposits and particulate build-up

  • Longer oil life means less maintenance, process downtime, less oil disposal, and reduced environmental waste